Promadio MPad10W Fully Rugged Handheld Tablet

Promadio MPad10W Fully Rugged Handheld Tablet

 

. Fully rugged performance, suitable for harsh environment;

. High-end configuration, large storage space;

. 10″ touch screen

. Extensive sets of external interfaces.

 

 

Hardware Specification

 

Hardware Platform Intel Skylake i5-7200u, 2.4GHz up to 2.8GHz, 3M Cache, TDP 15W
Software Platform Microsoft Windows 10 Enterprise 64bit
Memory 8GB
Hard disk 256GB SSD
Graphics Intel HD Graphics 520
Display 10.1inch, 1920*1200, Sunlight Readable, 600Lumi, Anti glare treatment
Capacitive Touch 10 points, support wet hands and glove operation
Rear Camera 8M, with AF
Light LED 2 LED
Network Intel i211 RJ45
LTEFDD:optional
WCDMA:optional
Bluetooth V4.2 with BLE
WIFI(2.4G/5G) 802.11a/b/g/n/ac
Fingerprint Optional, Support Windows Hello
GNSS Optional, uBlox NEO-M8N, Support GPS, GLONASS, BD
Speaker 2.0Wx2
Mic Built-in
LED 4(Power, Hard Disk, Battery 1, Battery 2)

 

Interface

 

Docking connector 20pin Docking pin (Optional)
Back Pogo-pin Non
USB3.0 9pin x1
USB2.0 4pin x1
HDMI Mini Type-C
Audio Jack 3.5mm Headphone out/Mic-in Combo
DC Jack x1 3.5mm DC Jack
Micro SD Support TF card (Optional)
SIM card Support Nano SIM card (Optional)
External Antenna Connector 2 External Antenna Connector:

Remote WIFI 2.4GHz Antenna x1

GNSS Pass-through Antenna x1

 

Security

 

Kensington Lock Support
Encryption Support TPM2.0(Optional)

 

Battery and Charger

 

Battery 8.4V 8000mAH x1

There are LEDs on battery indicate remaining Capacity

Hot-Swap Support, the system can work normally when change battery (Optional)
Work Time 6 Hours
Charging Time Less than 3.5 Hours
AC Input : 100~240V AC 50/60Hz

Output: 12V DC 5A

 

Environment

 

Operation [-20℃~+55℃]
Storage [-40℃~+70℃]
Humidity 95% RH, non-condensing
ESD Contact 8KV,Air 12KV
Drop 1.2m to comcrete

1.5m to wood floor

Dust & Water resistance test IP54

 

Promadio MPad7W Fully Rugged Handheld Tablet

Promadio MPad7W Fully Rugged Handheld Tablet

 

. Fully rugged performance, suitable for harsh environment;

. High-end configuration, large storage space;

. 7“ touch screen, support 5“ touch screen;

. Extensive sets of external interfaces;

. Small size and lightweight, easy to carry.

 

 

Technical Specification

 

Screen Size 7-inch ultra-high-definition display with a screen aspect ratio of 16:10
Screen Resolution 800 X 1280 resolution anti-glare HD screen
Screen Level Screen display with strong light visible, maximum brightness 1000cd/m2
CPU Intel Cherry Trail Z8350, 1.44GHz-1.92GHz
Graphics Processor Intel HD Graphics
RAM memory 4GB LPDDR3
Storage 64GB EMMC
Touch Screen Multi-touch, hardness above 7H, scratch-resistant, COF
Camera Front 2-mega pixel camera, rear 5-mega pixel camera with autofocus
Speaker Built-in 8Ω/1W Bose speaker x 1
Microphone Sensitivity: -42db, output impedance 2.2kΩ
Standard battery capacity Built-in 7500mAh/3.7V polymer lithium ion battery
4G module Built-in 4G full Netcom data module for data communication
Wi-Fi connection Wireless network connection built-in 802.11b/g/n/ac dual-band Wi-Fi function and Bluetooth 4.2(BLE) class1
GPS positioning U-BLOX M8Q GNSS module, support GPS, BeiDou, Glonass
Sensor Built-in gravity acceleration sensor
Body buttons Power button, volume increase and decrease, etc.
Device-specific interface HDMI 1.4a Type CTF deck, Micro USB2.0 OTG Waterproof φ3.5mm power connector, 4G card slot, 12pin Pogo Pin (USB+power)
Data acquisition(optional) NFC, RFID, ID card reading, fingerprint acquisition, UHF, 1D/2D barcode module
Operating System Windows 10 IOT 64bit (optional Windows10 Home/Pro)
Device protection IP67 level (fall proof, waterproof, dustproof)
Gross Weight Approximately 680g
Overall size 216.98mm x 133.96mm x 21.4mm
Device temperature index Working temperature -10℃~+50℃, storage temperature -30℃~+70℃