P5000

Power Divider

Product Name:

P5004 4-route Power Divider
P5003 3-route Power Divider
P5002 2-route Power Divider

Structural Features:

* Adopt compact design with small size, Portable, and facility to installation;
* Adopt standard high-frequency connectors: L16 type high-frequency socket;
* The cavity is solid with good seal and good heat conduction;
* Heat dissipaters of different sizes can be equipped with based on the actual engineering demands to ensure normal working.

Technical Features:

* Wide frequency band, and high degree of isolation;
* Small VSWR, low insertion loss and good flatness;
* Adopt imported high-frequency resistors which are precisely matched, ensuring consistence of all the technical parameters;
* The 3-route power divider and 4-route power divider adopt -1.5 RF wire instead of the microstrip line, the length of which can be revised according to the actual frequency demands (the length of wire is calculated based on the frequency wavelength);
* The power dividers are widely used;
* The power divider can also be used as power combiner by simply changing the connection method.

P5013 Unbalanced 3-route Power Divider

The “unbalanced 3-route power divider” is developed exclusively by Promadio and shall be applied in the special working environment of base station (can also be applied in usual environment) for better achievement of the engineering target.
Apart from all above-mentioned features, the unbalanced 3-route power divider has its own structural features:
* The microstrip circuit of the unbalanced power divider is made of copper plated with silver;
* The Q is even higher, allowing even higher power;
* The stand of the microstrip line is made of polyethylene, making sure that there is no influence to the technical parameters.